|Caution||Single-end quick connectors MUST be depressurized prior to disconnection.|
|Width Across Flat (H) (mm)||22.00|
|Diameter (D) (in)||1.030|
|Working Pressure (psig)||Up to 3000|
|Working Pressure (bar)||Up to 206|
|Notes||Long Life Cycle.
Dimensions shown with Hy-Lok nuts in finger-tight position, where applicable.
All dimensions are in millimeters unless otherwise specified. Dimensions are for reference only, subject to change.
|End Connection Size (in)||1/4 ~ 1/2|
|Tube Outside Diameter (mm)||10.00|
|Length (L) (in)||2.990|
|Length (L) (mm)||75.90|
|Temperature Rating with FKM O-Ring (ºC)||-23 ~ 204|
|Temperature Rating with FKM O-Ring (ºF)||-10 ~ 400|
|O-Ring Material Options||NBR: -10 to 250 ºF (-23 to 121 ºC), FFKM: -10 to 600 ºF (-23 to 315 ºC), Neoprene: -40 to 250 ºF (-40 to 121 ºC), Ethylene Propylene: -50 to 300 ºF (-46 to 149 ºC)|
|Air Inclusion (cm³)||1.0|
|Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (gpm)||6|
|Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (L/min)||22.7|
|Minimum Panel Hole Diameter (in)||21/32|
|Minimum Panel Hole Diameter (mm)||16.70|
|Maximum Panel Thickness (in)||0.270|
|Maximum Panel Thickness (mm)||6.90|
|Diameter (D) (mm)||26.20|
If you have any questions about any of our products or services, don’t hesitate to give us a call. For any inquiries, fill out the form and one of our Hy-Lok representative will contact you soon.