|Unified National Fine Thread (U)||3/4"-16|
|Width Across Flat (H) (mm)||23.80|
|Width Across Flat (H) (in)||15/16|
|Working Pressure (psig)||Up to 3000|
|Working Pressure (bar)||Up to 206|
|Flow Coefficient (Cv)||1.50|
|Notes||Long Life Cycle.
Dimensions shown with Hy-Lok nuts in finger-tight position, where applicable.
All dimensions are in millimeters unless otherwise specified. Dimensions are for reference only, subject to change.
Spillage - Spillage is the amount of system fluid that is emitted when a quick connector is uncoupled.
Air inclusion - Air inclusion is the amount of air trapped between the body and stem that enters the system when a quick connector is coupled.
|End Connection Size (in)||1/4 ~ 1/2|
|Tube Outside Diameter (in)||1/2|
|Length (L) (in)||2.960|
|Length (L) (mm)||75.20|
|Insertion Depth (in)||1.680|
|Insertion Depth (mm)||42.70|
|Quick Connector Style||Double End Shut Off (DESO)|
|Stem Sleeve Color||Red|
|Temperature Rating with FKM O-Ring (ºC)||-23 ~ 204|
|Temperature Rating with FKM O-Ring (ºF)||-10 ~ 400|
|O-Ring Material Options||NBR: -10 to 250 ºF (-23 to 121 ºC), FFKM: -10 to 600 ºF (-23 to 315 ºC), Neoprene: -40 to 250 ºF (-40 to 121 ºC), Ethylene Propylene: -50 to 300 ºF (-46 to 149 ºC)|
|Air Inclusion (cm³)||3.0|
|Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (gpm)||10|
|Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (L/min)||37.8|
|Flared Angle (º)||37|
If you have any questions about any of our products or services, don’t hesitate to give us a call. For any inquiries, fill out the form and one of our Hy-Lok representative will contact you soon.