Catalog

Q2SS3F-6T Q Series 37 Degree Flared Tube Stem Connector Fittings

Model: Q2SS3F-6T

Request Quote Quantity

Product Details

  • Gauge Calibration
  • Sampling System
  • Portable Test Equipment
  • Laboratory Equipment
  • Gas Distribution
  • Biopharmaceutical
  • Easy to use.
  • Minimum equipment shutdown.
  • No tools required to make or break a connection.
  • No probability of cross threading, galling, under or over-tightening.
  • Interchangeable with same type of Swagelok, Parker, Hoke and TOMCO components.
  • Single End Shut Off (SESO) - This Quick Connector style features body only shut off. Stem is open to atmosphere when disconnected.
  • Use filters in front of quick connectors.
  • Protect uncoupled body and stem with body and stem protectors or dust caps.
  • Keep body and stem aligned when coupling and uncoupling.
  • Couple and uncouple the quick connectors at room temperature.
  • Couple and uncouple the quick connectors during system cleaning operations.
  • Support hanging hoses or other equipment to prevent side load.
  • Re-lubricate stem seal O-rings periodically.
Caution Single-end quick connectors MUST be depressurized prior to disconnection.
Series Q2
Unified National Fine Thread (U) 9/16"-18
Width Across Flat (H) (mm) 19.10
Width Across Flat (H) (in) 3/4
Working Pressure (psig) Up to 3000
Working Pressure (bar) Up to 206
Flow Coefficient (Cv) 1.00
Connection Type Flared
Notes Long Life Cycle.
Dimensions shown with Hy-Lok nuts in finger-tight position, where applicable.
All dimensions are in millimeters unless otherwise specified. Dimensions are for reference only, subject to change.
End Connection Size (in) 1/4 ~ 1/2
Tube Outside Diameter (in) 3/8
Length (L) (in) 2.310
Length (L) (mm) 58.80
Insertion Depth (in) 1.180
Insertion Depth (mm) 30.00
Quick Connector Style Single End Shut Off (SESO)
Temperature Rating with FKM O-Ring (ºC) -23 ~ 204
Temperature Rating with FKM O-Ring (ºF) -10 ~ 400
O-Ring Material Options NBR: -10 to 250 ºF (-23 to 121 ºC), FFKM: -10 to 600 ºF (-23 to 315 ºC), Neoprene: -40 to 250 ºF (-40 to 121 ºC), Ethylene Propylene: -50 to 300 ºF (-46 to 149 ºC)
Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (gpm) 6
Maximum Water Flow Coefficient (Cv) Rate at 70 ºF (20 ºC) (L/min) 22.7
Flared Angle (º) 37
Documentation
PDF Quick-Connector-Ordering-Information....

HAVE A QUESTION?

If you have any questions about any of our products or services, don’t hesitate to give us a call. For any inquiries, fill out the form and one of our Hy-Lok representative will contact you soon.

ADDITIONAL RESOURCES

Fluid Compatibility Guide
VIDEOS

Sign Up TO Join Our Newsletter