Hy-Lok bleed valves can be used on instrument fluid handling products, such as manifolds or gauge/root valves, in order to vent signal line pressure to atmosphere before disassembling of an instrument or to facilitate in calibration of control devices. End connection options include male NPT and SAE from 1/8" to 1/2".
Bleed valves are available in stainless steel, carbon steel, and alloy 400.
Hy-Lok purge valves are designed to manually bleed, vent or drain. The knurled cap is not separable from the valve body for safety. A simple quarter (1/4) turn from finger tight gives leak-free closure. Proper tightening with a wrench secures closure to the desired pressure rate with sufficient make-ups. Purge valve end connection options include female / male NPT, Hy-Lok and Hy-Lok tube stub from 1/8" to 1/2".
Purge valves are available in stainless steel, carbon steel, brass. Both bleed and purge valves are tested with nitrogen at 1000 psi(69 bar) to a max leak rate of 0.1 SCCM.
Contact your Hy-Lok fluid system solutions expert today to learn more or locate a distributor.
Browse the following Instrument Bleed and Purge Valve PDFs for technical dimensions, temperature & pressure ratings, and ordering information: